Supero SuperServer 2026TT-DLIBQRF Скачать руководство пользователя страница 79

Страница: 79 / 104

Chapter 7: BIOS

7-11

USB 2.0 Controller

Select Enabled to activate the onboard USB 2.0 controller. The options are

Enabled

and Disabled.

USB 2.0 Controller Mode

This setting allows you to select the USB 2.0 Controller mode. The options are

Hi-Speed (480 Mbps

) and Full Speed (12 Mbps).

BIOS EHCI Hand-Off

Select Enabled to enable BIOS Enhanced Host Controller Interface support to

provide a workaround solution for an operating system that does not have EHCI

Hand-Off support. When enabled, the EHCI Interface will be changed from the

BIOS-controlled to the OS-controlled. The options are Disabled and

Enabled

IDE/SATA Confi guration

When this submenu is selected, the AMI BIOS automatically detects the presence

of the IDE devices and displays the following items:

SATA#1 Confi guration

If Compatible is selected, it sets SATA#1 to legacy compatibility mode, while se-

lecting Enhanced sets SATA#1 to native SATA mode. The options are Disabled,

Compatible

and Enhanced.

Confi gure SATA#1 as

This feature allows the user to select the drive type for SATA#1. The options are

IDE,

RAID

and AHCI. (When the option-RAID is selected, the item-ICH RAID

Code Base will appear. When the option-AHCI is selected, the item-SATA AHCI

will be available.)

ICH RAID Code Base (This feature is available when the option-RAID is

selected)

Select Intel to enable Intel's SATA RAID fi rmware to confi gure Intel's SATA RAID

settings. Select Adaptec to enable Adaptec's SATA RAID fi rmware to confi gure

Adaptec's SATA RAID settings. The options are

Intel

and Adaptec.

SATA AHCI (This feature is available when the option-AHCI is selected)

Select Enable to enable the function of Serial ATA Advanced Host Interface.

(Take caution when using this function. This feature is for advanced programmers

only.) The options are Enabled and

Disabled

. If the option-Enabled is selected,

the following item will display.

Содержание SuperServer 2026TT-DLIBQRF









































































































Результаты поиска

Содержание SuperServer 2026TT-DLIBQRF

Отзывы:

Похожие инструкции для SuperServer 2026TT-DLIBQRF

Бренды по названию

Популярные бренды

Supero SuperServer 2026TT-DLIBQRF, Руководство пользователя

Результаты поиска

Содержание SuperServer 2026TT-DLIBQRF

Отзывы:

Похожие инструкции для SuperServer 2026TT-DLIBQRF

Бренды по названию

Популярные бренды