Supero SUPERSERVER 2026T-6RF+, Руководство пользователя

Страница: 26 / 126

2-12
S
UPER
S
ERVER 2026T-6RFT+/6RF+ User's Manual
2-7 Checking the Drive Bay Setup
Next, you should check to make sure the peripheral drives and the hard drives and
backplane have been properly installed and all connections have been made.
Checking the Drives
1. All drives are accessable from the front of the server. The hard disk drives
can be installed and removed from the front of the chassis without removing
the top chassis cover.
2. A slim DVD-ROM drive may be preinstalled in your server. For servicing the
DVD-ROM drive, you will need to remove the top chassis cover. Refer to
Chapter 6 if you need to reinstall a DVD-ROM drive to the system.
3. Depending upon your system's con fi guration, your system may have one or
more drives already installed. If you need to install hard drives, please refer to
Chapter 6.
Checking the Airfl ow
1. Air fl ow is provided by fi ve sets of 4-cm fans (each set of fans consists of
two fans that are mounted back to back). The system component layout was
carefully designed to direct suf
fi cient cooling air fl ow to the components that
generate the most heat.
2. Note that all power and data cables have been routed in such a way that they
do not block the air fl ow generated by the fans.
Providing Power
1. The last thing you must do is to provide input power to the system. Plug the
power cord from the power supply module into a high-quality power strip that
offers protection from electrical noise and power surges.
2. It is recommended that you use an uninterruptible power supply (UPS)
source.