Supero SUPERSERVER 1018GR-T, Руководство пользователя

Страница: 68 / 140

5-20
SUPERSERVER 1018GR-T User's Manual
System Management Bus
A System Management Bus header
for the IPMI slot is located at JIPMB1.
Connect the appropriate cable here
to use the IPMB I2C connection on
your system.
System Management
Bus (JIPMB1)
Pin# Definition
1 Data
2 Ground
3 Clock
4 No Connection
Power Supply I
2
C
The Power Supply I
2
C Connector,
located at JI2C1, monitors the status
of the power supply, fan and system
temperature. See the table on the right
for pin definitions.
PWR Supply (I
2
C)
Pin Definitions
Pin# Definition
1 Clock
2 Data
3 PWR Fail
4 Ground
5 3.3V
DOM PWR Connector
The Disk-On-Module (DOM) power
connector, located at JSD1/JSD2,
provides 5V (Gen1/Gen) power to
a solid-state DOM storage device
connected to one of the SATA ports.
See the table on the right for pin
definitions.
DOM PWR (JSD1)
Pin Definitions
Pin# Definition
1 5V
2 Ground
3 Ground
Serial Link General-Purpose Headers
(SGPIO)
Pin Definitions
Pin# Definition Pin Definition
1 NC 2 NC
3 Ground 4 DATA Out
5 Load 6 Ground
7 Clock 8 NC
T-SGPIO1~4 Headers
Three T-SGPIO (Serial-Link General
Purpose Input/Output) headers are
located next to the I-SATA Ports on
the motherboard. These headers
are used to communicate with the
enclosure management chip in the
system. See the table on the right for
pin definitions.