Supero SUPERO X8DTG-QF, Руководство пользователя

Страница: 68 / 99

4-8
X8DTG-QF User’s Manual

Advanced Chipset Control
The items included in the Advanced Settings submenu are listed below:

CPU Bridge Confi guration
QPI Links Speed
This feature selects QPI's data transfer speed. The options are Slow-mode, and
Full Speed .
QPI Frequency (Available when QPI Links Speed is set to 'Full Speed')
This selects the desired QPI frequency. The options are Auto , 4.800 GT,
5.866GT, 6.400 GT.
QPI L0s and L1
This enables the QPI power state to low power. L0s and L1 are automatically
selected by the motherboard. The options are Disabled and Enabled.
Memory Frequency
This feature forces a DDR3 frequency slower than what the system has detected
to run at the frequency as specifi ed. The available options are Auto , Force DDR-
800, Force DDR-1066, Force DDR-1333 and Force SPD.
Memory Mode
The options are Independent , Channel Mirroring, and Lockstep.
Independent - All DIMMs are available to the operating system.
Channel Mirroring - The motherboard maintains two identical copies of all data
in memory for redundancy.
Lockstep - The motherboard uses two areas of memory to run the same set of
operations in parallel.
Demand Scrubbing
This is a memory error-correction scheme that allows the processor to write cor-
rected data back into the memory block from where it was read by the Processor.
The options are Enabled and Disabled .
Patrol Scrubbing
This is a memory error-correction scheme that works in the background looking
for and correcting resident errors. The options are Enabled and Disabled .