Supero SUPERO SUPERSERVER 8026B-6RF, Руководство пользователя

Страница: 95 / 100

A-1
Appendix A: POST Codes
Appendix A
POST Codes
During the POST (Power-On Self-Test) routines, which are performed each time
the system is powered on, errors may occur.
Non-fatal errors are those which, in most cases, allow the system to continue
the boot-up process. The error messages normally appear on the screen.
Fatal errors will not allow the system to continue the boot-up procedure. If a
fatal error occurs, you should consult with your system manufacturer for possible
repairs.
These fatal errors are usually communicated through a series of audible beeps.
The numbers on the fatal error list correspond to the number of beeps for the
corresponding error.
BIOS Error Beep Codes
Beep Code/LED Error Message Description
1 beep Refresh Circuits have been reset.
(Ready to power up)
5 short beeps + 1 long
beep Memory error No memory detected in the
system
8 beeps Display memory
read/write error Video adapter missing or with
faulty memory
OH LED On System OH System Overheat