Supero SUPERO SUPERSERVER 8026B-6RF, Руководство пользователя

Страница: 47 / 100

Chapter 5: Advanced Serverboard Setup
5-17
Serial Ports
A serial port is included on the
serverboard backpanel. See the table
on the right for pin defi nitions.
Serial Port Pin Defi nitions
Pin # Defi nition Pin # Defi nition
1 DCD 6 DSR
2 RXD 7 RTS
3 TXD 8 CTS
4 DTR 9 RI
5 Ground 10 NC
Universal Serial Bus (USB)
Two Universal Serial Bus ports (USB
0/1) are located on the I/O backpanel.
Additional onboard USB headers
(USB 2/3, USB5) can provide front
chassis access. See the tables on the
right for pin defi nitions.
USB2/3, USB5
Pin Defi nitions
USB2
Pin # Defi nition USB3/5
Pin # Defi nition
1 +5V 1 +5V
2 PO- 2 PO-
3 PO+ 3 PO+
4 Ground 4 Ground
5 NC 5 Key
(NC= No connection)
USB0/1
Pin Defi nitions
Pin# Defi nition
1 +5V
2 PO-
3 PO+
4 Ground
5 NA
Power LED/Speaker
On the JD1 header, pins 1-3 are used
for power LED indication and pins 4-7
are for the speaker. See the tables
on the right for pin defi nitions. Please
note that the speaker connector pins
(4-7) are for use with an external
speaker. If you wish to use the on-
board speaker, you should close pins
6-7 with a jumper.
Speaker Connector
Pin Settings
Pin Setting Defi nition
Pins 4-7 External Speaker
Pins 6-7 Internal Speaker
Internal Speaker
The Internal Speaker (SP1) provides
audible indications for various beep
codes. See the table on the right for
pin defi nitions.
Internal Buzzer (SP1)
Pin Defi nition
Pin# Defi nitions
Pin 1 Pos. (+) Beep In
Pin 2 Neg. (-) Alarm
Speaker
PWR LED Connector
Pin Defi nitions
Pin Setting Defi nition
Pin 1 Anode (+)
Pin2 Cathode (-)
Pin3 NA