Supero SUPERO SuperServer 6026TT-GIBQRF Скачать руководство пользователя страница 84

Страница: 84 / 104

7-18

SUPERSERVER 6026TT-GTRF/GIBXRF/GIBQRF User's Manual

User intervention: If the system buzzer and Overheat LED has activated, take action

immediately by checking the system fans, chassis ventilation and room temperature

to correct any problems.

Notes

The system may shut down if it continues for a long period to prevent

damage to the CPU.

The information provided above is for your reference only. For more

information on thermal management, please refer to Intel’s Web site at www.

Intel.com.

System Temperature:

The system temperature will be displayed (in degrees in

Celsius and Fahrenheit) as it is detected by the BIOS.

Fan Speed Control Monitor

This feature allows the user to decide how the system controls the speeds of the

onboard fans. The CPU temperature and the fan speed are correlative. When

the CPU on-die temperature increases, the fan speed will also increase, and vice

versa. Select Workstation if your system is used as a Workstation. Select Server if

your system is used as a Server. Select “Disabled, (Full Speed @12V)” to disable

the fan speed control function and allow the onboard fans to constantly run at the

full speed (12V). The Options are: 1.

Disabled (Full Speed)

, 2. Server Mode, 3.

Workstation Mode.

Fan1 ~ Fan 4 Reading

This feature displays the fan speed readings from fan interfaces Fan1 through

Fan5.

CPU1 Vcore, CPU2 Vcore, +5Vin, +12Vcc (V), VP1 DIMM, VP2 DIMM, 3.3Vcc (V),

and Battery Voltage.

ACPI Confi guration

Use this feature to confi gure Advanced Confi guration and Power Interface (ACPI)

power management settings for your system.

ACPI Version Features

The options are

ACPI v1.0

, ACPI v2.0 and ACPI v3.0. Please refer to ACPI's website

for further explanation: http://www.acpi.info/.

ACPI APIC Support

Select Enabled to include the ACPI APIC Table Pointer in the RSDT (Root System

Description Table) pointer list. The options are

Enabled

and Disabled.

Содержание SUPERO SuperServer 6026TT-GIBQRF









































































































Результаты поиска

Содержание SUPERO SuperServer 6026TT-GIBQRF

Отзывы:

Похожие инструкции для SUPERO SuperServer 6026TT-GIBQRF

Бренды по названию

Популярные бренды

Supero SUPERO SuperServer 6026TT-GIBQRF, Руководство пользователя

Результаты поиска

Содержание SUPERO SuperServer 6026TT-GIBQRF

Отзывы:

Похожие инструкции для SUPERO SuperServer 6026TT-GIBQRF

Бренды по названию

Популярные бренды