Supero Super X8DTL-3, Руководство пользователя

Страница: 84 / 101

4-22
X8DTL-3/X8DTL-i/X8DTL-3F/X8DTL-iF User's Manual
Gateway Address
This is the IP address of the gateway in the network. This is usually a router.
Mac Address
The BIOS will automatically enter the Mac address of this machine; however it may
be over-ridden. Mac addresses are 6 two-digit hexadecimal numbers (Base 16, 0 ~
9, A, B, C, D, E, F) separated by dots. (i.e., 00.30.48.D0.D4.60).

SET PEF Confi guration
PEF Support
Select Enabled to enable Platform Event Filter (PEF) support which will interpret
BMC events and perform actions based on pre-determined settings or events and
performs actions based on pre-determined settings or 'traps' under IPMI 1.5 speci-
fi cations. The default is Disabled.
The following items will appear if PEF Support is set to Enabled.
PEF Action Global Control (Available if the item-PEF Support is enabled)
These are the different actions based on BMC events. The options are Alert , Power
Down, Reset System, Power Cycle, OEM Action, Diagnostic Interface.
Alert Startup Delay (Available if the item-PEF Support is enabled)
This feature inserts a delay during startup for PEF alerts. The options are Enabled
and Disabled .
Startup Delay (Available if the item-PEF Support is enabled)
This feature enables or disables startup delay. The options are Enabled and Dis-
abled .
Event Message for PEF Action (Available if the item-PEF Support is
enabled)
This enables of disables Event Messages for PEF action. Refer to Table 24.6 of
the IPMI 1.5 Specifi cation for more information at www.intel.com. The options
are Disabled and Enabled.
BMC Watch Dog Timer Action
Allows the BMC to reset or power down the system if the operating system hangs
or crashes. The options are Disabled , Reset System, Power Down, Power Cycle.
BMC Watch Dog TimeOut [Min:Sec]
This option appears if BMC Watch Dog Timer Action (above) is not set to Dis-
abled. This is a timed delay in minutes or seconds, before a system power down