manualshive.com logo in svg

Supero Super X8DAH+, Руководство пользователя

Поделиться
Скачать
Supero Super X8DAH+ Скачать руководство пользователя страница 86

4-26

X8DAH+/X8DAH+-F User’s Manual

Boot Device Priority

This feature allows the user to specify the sequence of priority for the Boot Device. 

The settings are 1st boot device, 2nd boot device, 3rd boot device, 4th boot device, 

5th boot device and Disabled. 

1st Boot Device - [USB: XXXXXXXXX]

• 

2nd Boot Device - [CD/DVD: XXXXXXXXX]

• 

Hard Disk Drives

This feature allows the user to specify the boot sequence from all available hard 

disk drives. The settings are Disabled and a list of all hard disk drives that have 

been detected (i.e., 1st Drive, 2nd Drive, 3rd Drive, etc).

1st Drive - [SATA: XXXXXXXXX]

• 

Removable Drives

This feature allows the user to specify the boot sequence from available Removable 

Drives. The settings are 1st boot device, 2nd boot device, and Disabled. 

1st Drive - [USB: XXXXXXXXX]

• 

2nd Drive

• 

CD/DVD Drives

This feature allows the user to specify the boot sequence from available CD/DVD 

Drives (i.e., 1st Drive, 2nd Drive, etc).4-6  

Exit Options

Select the Exit tab from the AMI BIOS Setup Utility screen to enter the Exit BIOS 

Setup screen.

Содержание Super X8DAH+






































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды