Supero SUPER X5DA8, Руководство пользователя

Страница: 45 / 92

Chapter 2: Installation
2-15
GLAN Enable/Disable
J D 4 ( J P L 1 o n t h e X 5 D A L - G /
X5DAL-TG2) enables or disables
t h e G L A N p o r t ( s ) o n t h e
motherboard. See the table on the
right for jumper settings. The de-
fault setting is enabled.
Jumper
Position
Pins 1-2
Pins 2-3
Definition
Enabled
Disabled
GLAN
Enable/Disable
Jumper Settings
(JD4/JPL1)
Power Fail Alarm Enable/
Disable
If your system has three power
supply units installed with one act-
ing as a backup, you can be noti-
fied in the event of a power sup-
ply failure. If you only have one
o r t w o p o w e r s u p p l y u n i t s i n -
stalled, you should disable this
with JP9 to prevent false alarms.
S e e t h e t a b l e o n t h e r i g h t f o r
jumper settings. The default set-
ting is disabled.
Jumper
Position
Open
Closed
Definition
Disabled
Enabled
Power Fail Alarm
Enable/Disable
Jumper Settings (JP9)
CPU Chassis/CPU Fan
Select (not on X5DAL-G/
X5DAL-TG2)
JP33 allows you to select to use ei-
ther the CPU fan or the Chassis fan
for the appropriate fan header. The
default position is open to select the
CPU fan. The CPU Chassis fan is
intended for use with Supermicro
chassis. See the table on the right
for jumper settings.
Jumper
Position
Open
Closed
Definition
CPU Chassis
CPU Fan
CPU Chassis/CPU Fan
Select Jumper Settings
(JP33)