Supero SUPER P4STA Скачать руководство пользователя страница 58 | Manualshive

Страница: 58 / 92

background image

S

UPER P4STA

User's Manual

4-10

BIOS

[System BIOS Cacheable]

If enabled, the system BIOS information stored in the BIOS ROM (Read Only
Memory) chip will be written and temporarily stored in the "cacheable"
memory section of the CPU, so the CPU has faster access to the information.
The settings are: "Enabled" or "Disabled". The default setting is "Enabled".

[Video BIOS Cacheable]

If enabled, the information regarding the Video BIOS stored in the BIOS ROM
(Read Only Memory) chip will be written and temporarily stored in the
"cacheable" memory section of the CPU to allow the CPU to have faster
access to the information. The settings are: "Enabled" or "Disabled". The
default setting is "Enabled".

[Video RAM Cacheable]

If enabled, the information regarding the Video card stored in the RAM chip
(Randon Access Memory) will be written and temporarily stored in the
"cacheable" memory section of the CPU to allow the CPU to have faster
access to the information. The settings are "Enabled" and "Disabled". The
default setting is "Enabled".

[Memory Hole at 15M-16M]

To improve the performance of the sytem, a certain section of the memory
will be reserved for the use of the devices installed in the PCI slots. This
section of memory must be mapped into the memory space below 16MB.
The settings are: "15M-16M" or "Disabled". The default setting is "15M16M".

[Delayed Transition]

If enabled, the information regarding Video BIOS stored in the BIOS ROM
(Read Only Memory) chip will be written and temporarily stored in the
"cacheable" memory section of the CPU, so the CPU has faster access to
the information. The settings are: "Enabled" or "Disabled". The default setting
is "Enabled".

[AGP Aperture Size <MB>]

This option allows the user to set the Aperture size of Accelerated Graphics
Port (AGP). The settings are: "4M", "8M", "16M", "32M", "65M", "128M", and
"256M". The default setting is "64MB".

«
...
56
57
58
59
60
...
»

Содержание SUPER P4STA





























































































Отзывы:

Нет отзывов

Похожие инструкции для SUPER P4STA

Бренд: Intel Страницы: 80

Бренд: Linear Страницы: 10

Бренд: JETWAY Страницы: 56

Бренд: C&T Solution Страницы: 84

Бренд: MATSONIC Страницы: 78

Бренд: C-Control Страницы: 8

Strata Enabled NCV6357

Бренд: ON Semiconductor Страницы: 6

AnadigmApex AN231K04-DVLP3

Бренд: Anadigm Страницы: 16

Бренд: C&T Solution Страницы: 48

Z87 Extreme9/ac

Бренд: ASROCK Страницы: 116

Бренд: Texas Instruments Страницы: 20

Бренд: Gigabyte Страницы: 1

Бренд: DFI Страницы: 29

Бренд: DFI Страницы: 31

Бренд: Winmate Страницы: 72

SY-P4S DRAGON Ultra

Бренд: SOYO Страницы: 154

Бренд: THine Страницы: 13

cPCI-6620 Series

Бренд: ADLINK Technology Страницы: 80

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды