Supero SUPER P4SPA+, Руководство пользователя

Страница: 33 / 74

Chapter 2: Installation
2-13
CMOS Clear
JBT1 is not actually a jumper but
consists of two contact pads. To
clear the contents of CMOS, short
these pads together by touching
them both with a metal conductor
s u c h a s t h e h e a d o f a s m a l l
screwdriver. JBT1 is located near
the SATA header on the P4SPA+/
P4SPE. N o t e : f o r A T X
power supplies, you must com-
pletely shut down the system and
remove the AC power cord before
clearing CMOS.
2-7 Jumper Settings
Explanation of
Jumpers
To modify the operation of the
motherboard, jumpers can be used
to choose between optional set-
tings. Jumpers create shorts be-
t w e e n t w o p i n s t o c h a n g e t h e
function of the connector. Pin 1 is
identified with a square solder pad
on the printed circuit board. See
the motherboard layout pages for
jumper locations.
N o t e : O n a t w o - p i n j u m p e r ,
"Closed" means the jumper is on
both pins and "Open" means the
jumper is either on only one pin or
completely removed.
Connector
Pins
Jumper
Cap
Setting
Pin 1-2 short
3 2 1
3 2 1