S
UPER P4SGA/P4SGL/P4SGR/P4SGE
User's Manual
4-14
"Disabled".
Onboard Serial Port 1/Port 2
This setting allows the user to set the address and the corresponding IRQ
for the Serial Port1 and Serial Port 2. The options are "Disabled" , "3F8/
IRQ4", "2F8/IRQ3", "3E8/IRQ4", "2E8/IRQ3", and "Auto". The default setting
for Serial Port1 is "
3F8/IRQ4
" and the default for Port 2 is is "
2F8/IRQ3
".
UART Mode Select
This setting allows the user to select the UART mode for BIOS. The options
are "IrDA", "ASKIR" and "
Normal
".
RxD, TxD Active
This allows the user to change the settings for the "RxD, TxD Active"
function. The options are "Hi, Hi", "
Hi, Lo
", "Lo, Hi", and "Lo, Lo".
IR Transmission Delay
If "Enabled", the transmssion of IR (infrared) signals will be delayed. The
options are "
Enabled
" and "Disabled".
UR2 Duplex Mode
This setting set the mode for the UR2 Duplex Mode. The options are "Full"
and "
Half
".
Use IR Pins
This item sets the usage of the IR pins. The options are "RxD2, TxD2" and
"
IR-Rx2Tx2
".
Onboard Parallel Port
This setting allows the user to set the address and the corresponding IRQ
for the onboard parallel port. The options are "Disabled", "
378/IRQ7
", "278/
IRQ5" and "3BC/IRQ7".
