Supero SUPER P4SDA+, Руководство пользователя

Страница: 50 / 92

3-4
S
UPER P4SDA+/P4SDM User's Manual
boot block protection jumpers on the mainboard. At the DOS prompt upon
rebooting, enter the command "awdflash." Then type in the BIOS file that
you want to update (xxxx.bin).
Question: After flashing the BIOS my system does not have video.
How can I correct this?
Answer: If the system does not have video after flashing your new BIOS,
it indicates that the flashing procedure failed. To remedy this, first clear
CMOS per the instructions in this manual and retry the BIOS flashing proce-
dure. If you still do not have video, please use the following BIOS Recov-
ery Procedure. First, make sure the JPWAKE jumper is disabled. Then,
turn your system off and place the floppy disk with the saved BIOS image
file (see above FAQ) in drive A. Press and hold <Alt> and <F2> at the same
time, then turn on the power keeping these keys pressed until your floppy
drive starts reading. Your screen will remain blank until the BIOS program
is done. If the system reboots correctly, then the recovery was success-
ful. The BIOS Recovery Procedure will not update the boot block in your
BIOS.
Question: What's in the CD that came with my motherboard?
Answer: The supplied compact disc has quite a few drivers and programs
that will greatly enhance your system. We recommend that you review the
CD and install the applications you need. Applications on the CD include
850 chipset drivers for Windows and security and audio drivers.
Question: Why can't I turn off the power using the momentary
power on/off switch?
Answer: The instant power off function is controlled in BIOS by the Power
Button Mode setting. When the On/Off feature is enabled, the motherboard
will have instant off capabilities as long as the BIOS has control of the
system. When the Standby or Suspend feature is enabled or when the
BIOS is not in control such as during memory count (the first screen that
appears when the system is turned on), the momentary on/off switch must
be held for more than four seconds to shut down the system. This feature
is required to implement the ACPI features on the motherboard.