Supero SUPER P4SCT Скачать руководство пользователя страница 15

Страница: 15 / 100

Chapter 1: Introduction

1-9

1-2

Chipset Overview: Intel's Canterwood(875P) and

Canterwood ES (E7210)

Intel’s Canterwood Chipset (875P) and Canterwood ES (E7210) contains the

following main components: Canterwood Memory Controller Hub (MCH) and

the I/O Controller Hub (6300ESB-Hance Rapids ICH). These two compo-

nents are interconnected via Hub Interface.

Memory Controller Hub (MCH)

The Canterwood Memory Controller Hub (MCH) is designed to support Intel

PGA 478-pin Processors. The function of the Canterwood MCH is to arbi-

trate the flow of data transfer between system bus (FSB), system memory,

and Hub Interface. The Canterwood MCH supports 800 MHz FSB, 400/333

Memory Interface, 533 MHz FSB, 333/266 Memory Interface, and 400 MHz

FSB 266 MHz Memory Interface.

System Memory Interface

The Canterwood Memory Controller (MCH) supports two 64-bit wide DDR

data channels with bandwidth up to 6.4 GB/s (DDR400) in dual channel

mode. It supports 128-Mb, 256-Mb, 512-Mb, x8, X16 DDR. Maximum system

memory supports up to 4.0 GB for Dual-Channel. ECC/Non ECC unbuffered

DDR DIMMs are supported, but it does not support registered, mixed-mode

DIMMs.

Hance Rapids (6300ESB) ICH System Features

In addition to providing the I/O subsystem with access to the rest of the

system, the 6300ESB (Hance Rapids) I/O Controller Hub (Hance Rapids ICH)

integrates many I/O functions.

The 6300ESB (Hance Rapids) integrates: 2-channel Ultra ATA/100 Bus Mas-

ter IDE Controller, two Serial ATA (SATA) Host Controllers, SMBus 2.0 Con-

troller, LPC/Flash BIOS Interface, PCI-X (66MHz) 1.0 Interface, PCI 2.2 Inter-

face and System Management Controller.

*Notes:

Intel 875P Canterwood (*P4SCT/P4SCT+II)

Intel E7210 Canterwood ES (*P4SCT+)

Содержание SUPER P4SCT





































































































Результаты поиска

Содержание SUPER P4SCT

Отзывы:

Похожие инструкции для SUPER P4SCT

Бренды по названию

Популярные бренды

Supero SUPER P4SCT, Руководство пользователя

Результаты поиска

Содержание SUPER P4SCT

Отзывы:

Похожие инструкции для SUPER P4SCT

Бренды по названию

Популярные бренды