Supero SUPER P4DP6, Руководство пользователя

Страница: 41 / 90

Chapter 2: Installation
2-17
Thermal Fan Enable/Disable
(P4DP8-G2, P4DPE-G2,
P4DPi-G2, P4DP6)
JP38 allows you to enable or disable
the thermal fan. When enabled, the
fan will operate continuously. When
disabled, it will operate only when a
predefined temperature threshold
has been exceeded. See the table
on the right for jumper settings.
Ju m p e r
P o sitio n
O p e n
C lo se d
D e fin itio n
D isa b le d
E n a b le d
T h e rm a l F a n
E n a b le /D is a b le
J u m p e r S e tting s (J P 3 8 )
Chassis/Overheat Fan
Select (P4DP8-G2, P4DPE-
G2, P4DPi-G2, P4DP6)
JP48 allows you to select to use ei-
ther the Chassis fan or the Over-
h e a t f a n f o r t h e a p p r o p r i a t e f a n
h e a d e r . T h e d e f a u l t p o s i t i o n i s
closed to select the Chassis fan.
The Overheat fan is intended for
use with Supermicro chassis. See
the table on the right for jumper set-
tings.
Ju m p e r
P o sitio n
O p e n
C lo se d
D e fin itio n
D isa b le d
E n a b le d
T h e rm a l F a n
E n a b le /D is a b le
J u m p e r S e tting s (J P 3 8 )
Watch Dog Enable/Disable
The Watch Dog jumper (located on
JP37) allows you to enableor dis-
able the Watch Dog feature. The
default position is open to disable
the Watch Dog timer. When en-
abled, Watch Dog can reboot your
PC if an application is "hung up" or
the system goes down. See the
table on the right for jumper set-
tings.
Note: Watch Dog is not available on
P4DP6 revisions earlier than 1.21.
Ju m p e r
P o sitio n
O p e n
C lo se d
D e fin itio n
D isa b le d
E n a b le d
W a tc h D o g T im e r E n a b le /
D is a b le J u m p e r S e ttin g s
(J P 3 7 )