Supero SUPER P4DL6, Руководство пользователя

Страница: 34 / 92

2-8
S
UPER P4DL6/P4DLR+/P4DLR User’s Manual
Power LED
The Power LED connection is lo-
cated on pins 15 and 16 of JF1.
Refer to the table on the right for
pin definitions.
Pin
Number
15
16
Definition
+5V
Control
PW R_LED Pin Definitions
(JF1)
ATX Power Supply 24-pin Connector
Pin Definitions
Pin Number Definition
13
+3.3V
14 -12V
15 COM
16 PS_ON#
17 COM
18 COM
19 COM
20 Res(NC)
21 +5V
22 +5V
23 +5V
24 COM
Pin Number Definition
1 +3.3V
2 +3.3V
3 COM
4 +5V
5 COM
6 +5V
7 COM
8 PW R_OK
9 5VSB
10 +12V
11 +12V
12 +3.3V
HDD LED
The HDD LED (for IDE Hard Disk
Drives) connection is located on
pins 13 and 14 of JF1. Attach the
IDE hard drive LED cable to these
pins to display disk activity. Refer
to the table on the right for pin
definitions.
(IDE) HDD LED Pin
Definitions
(JF 1)
Pin
Number
13
14
Definition
+5V
HD Active
2-5 Connecting Cables
ATX Power Connection
T h e p o w e r s u p p l y c o n n e c t o r
meets the SSI (Superset ATX) 24-
pin specification, however it also
supports a 20-pin power supply
connector. Make sure that the ori-
entation of the PS connector is
correct. See the table on the right
for pin definitions.
Pins
1 thru 4
5 thru 8
Definition
Ground
+12v
8-Pin +12v Power Supply
Connector (PW R_SEC)
PWR_SEC Connection
In addition to the Primary ATX
p o w e r c o n n e c t o r ( a b o v e ) , t h e
Secondary 12v 8-pin PWR_SEC
connector must also be connected
to your power supply. See the
table on the right for pin defini-
tions.