Supero SUPER 370SBA Скачать руководство пользователя страница 59

Страница: 59 / 92

Chapter 5: Running Setup

5-5

been tried for booting). If selected as

and all selected boot devices

failed to boot, the BIOS will try not to boot from the other boot devices

which may be present but not selected as boot devices in setup.

Initial Display Mode

This option determines the display screen with which the POST is going to

start the display. The settings for this option are

BIOS

Silent

. If

selected as

BIOS,

the POST will start with the normal sign-on message

screen. If

Silent

is selected, the POST will start with the silent screen.

Display Mode at Add-on ROM Init

This option determines the display mode during add-on ROM (except Video

add-on ROM) initialization. The settings for this option are

Force BIOS

Keep Current

. If selected as

Force BIOS,

the POST will force the display

to be changed to BIOS mode before giving control to any add-on ROM. If

no add-on ROM is found, then the current display mode will remain

unchanged even if this setup question is selected as

Force BIOS.

selected as

Keep Current,

then the current display mode will remain

unchanged.

Floppy Access Control

The settings for this option are

Read-Write

Read-Only

Hard Disk Access Control

The settings for this option are

Read-Write

Read-Only

S.M.A.R.T. for Hard Disks

S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a

technology developed to manage the reliability of the hard disk by predict-

ing future device failures. The hard disk needs to be S.M.A.R.T. capable.

The settings for this option are

Disabled

Enabled

Note: S.M.A.R.T.

cannot predict all future device failures. S.M.A.R.T. should be used as

a warning tool, not as a tool to predict the device reliability

Boot Up Num-Lock

Settings for this option are

Off

. When this option is set to

, the

BIOS turns off the Num Lock key when the system is powered on. This will

enable the end user to use the arrow keys on both the numeric keypad and

the keyboard.

PS/2 Mouse Support

Settings for this option are

Enabled

Disabled

. When this option is set to

Enabled

, AMIBIOS supports a PS/2-type mouse.

Содержание SUPER 370SBA





























































































Результаты поиска

Содержание SUPER 370SBA

Отзывы:

Похожие инструкции для SUPER 370SBA

Бренды по названию

Популярные бренды

Supero SUPER 370SBA, Руководство пользователя

Результаты поиска

Содержание SUPER 370SBA

Отзывы:

Похожие инструкции для SUPER 370SBA

Бренды по названию

Популярные бренды