Supero SC510 Series, Руководство пользователя

Страница: 29 / 39

4-13
Chapter 4: Chassis Setup and Maintenance
The SC510-200B Chassis has a 200 watt power supply. This power supply is auto-
switching capable. This enables it to automatically sense and operate at a 100v to
240v input voltage.
The SC510-200B chassis has one power supply. In the unlikely event that the
power supply unit fails, the system will shut down and you will need to change the
power supply unit.
New units can be ordered directly from Supermicro (see contact information in the
Preface).
Replacing the Power Supply
Unplug all power leading to the chassis.
Disconnect all wiring from the power supply.
Remove the four screws which hold the power supply in the chassis. The
two front mounting screws are located on the front of the power supply. The
two rear mounting screws are accessed on the underside of the chassis and
1.
2.
3.
4-8 Power Supply
Figure 4-10: Installing the Power Supply
Power Supply
Mounting Thru Holes
Front Mounting Screws
Rear Mounting Screws