Garland Technology
Modular Chassis
Available in 1U (4 Slots) and 2U (12 Slots)
AC or DC Power with Filtering Backplane
The M1GXXCE Filtering Backplane Chassis can receive up to 4 or 12 1Gbps Modules
depending on whether the chassis is a 1U chassis or a 2U chassis. Both chassis are equipped
with dual internal power supplies for either AC or DC power sources.
The backplane feature can be used with all the Garland Technology 1Gbps Modular TAPs. If
you have Garland Technology Modules purchased before this Aggregating Backplane Chassis
was released (April, 2015) and you want to be able to take advantage of the aggregating
backplane you will need to update the firmware of the modules. Otherwise, the modules will
operate as they normally would in the new chassis. There is a RJ-45 Management port that
allows access to the Command Line Interface (CLI) and a Ethernet RJ-45 Management port so
the Chassis can be connected to the network.
M1G2ACE/M1G2DCE
M1G1ACE/M1G1DCE
M1G2ACE/M1G2DCE
M1G1ACE/M1G1DCE
Row 1
Figure 1: M1GXXCE Row & Slot Layout
Page 1
Page 1
V
Veerr 1
1
.6
Rear View
AC
DC
Rear View
AC
DC
Slot 4
Slot 3
Slot 4
Slot 4
Slot 3
Slot 2
Slot 2
Slot 2
Slot 2
Slot 1
Slot 1
Slot 1
Slot 1
Slot 4
Slot 4
Slot 2
Slot 2
Slot 1
Slot 1
Slot 3
Slot 3
Slot 4
Slot 2
Slot 1
Slot 3
Slot 4
Slot 4
Slot 2
Slot 2
Slot 1
Slot 1
Slot 3
Slot 3
Slot 4
Slot 2
Slot 1
Slot 3
Row 1
Row 2
Row 3
