Supero SC417E16-RJBOD1, Руководство пользователя, Страница: 25 / 104

4-5
Chapter 4: Chassis Setup and Maintenance
2. Place the hard drive carrier on a flat surface such as a desk, table or work
bench.
3. Slide the hard drive into the carrier with the printed circuit board side facing
down.
4. Carefully align the mounting holes in both the drive carrier and the hard drive.
5. Secure the hard drive to the carrier using four screws.
6. Replace the drive tray into the chassis. Close the drive carrier handle to lock
the drive carrier into place.
SAS/SATA
Hard Drive
Figure 4-5: Installing the Hard Drive into the Carrier
Figure 4-6: Installing the Hard Drive
3
5