Supero PDSLA, Руководство пользователя

Страница: 64 / 80

PDSLA/PDSLE User's Manual
4-8
4-4.3
I/O Device Confi guration
Onboard FDC
This setting allows the user to enable the onboard FDC controller. The options
are Enabled and Disabled.
Onboard Serial Port1/Onboard Serial Port2
This setting allows the user to set the address and the corresponding IRQ for
the Serial Port1 and Serial Port 2. The options are Disabled , 3F8/IRQ4,
2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, and Auto. The default setting for Serial Port1 is
3F8/IRQ4 and the default for Port 2 is 2F8/IRQ3 .
UART Mode Select
This setting allows the user to select the UART mode for the BIOS. The options
are IrDA, ASKIR and Normal .
RxD, TxD Active
This allows the user to change the settings for the RxD, TxD Active function.
The options are Hi, Hi, Hi, Lo , Lo, Hi, and Lo, Lo.
IR Transmission Delay
If Enabled, the transmission of IR (infrared) signals will be delayed. The options
are Enabled and Disabled.
UR2 Duplex Mode
This setting set the mode for the UR2 Duplex Mode. The options are Full and
Half .
Use IR Pins
This item sets the usage of the IR pins. The options are RxD2, TxD2 and IR-
Rx2Tx2.
Onboard Parallel Port
This setting allows the user to set the address and the corresponding IRQ for
the onboard parallel port. The options are Disabled, 378/IRQ7 , 278/IRQ5 and
3BC/IRQ7.
Parallel Port Mode
This setting sets the mode for the onboard Parallel port. The options are SPP ,
EPP, ECP, ECP+EPP and Normal.