Supero MicroCloud 5038ML-H12TRF Скачать руководство пользователя

Страница: 87 / 111

7-14

UPER

ERVER 5038ML-H12TRF User's Manual

Max TOLUD (Top of Low Usable DRAM)

This feature sets the maximum TOLUD value, which specifi es the "Top of Low

Usable DRAM" memory space to be used by internal graphics devices or graph-

ics controllers, if these devices are enabled. The options are

Dynamic

, 1 GB,

1.25 GB, 1.5 GB, 1.75 GB, 2 GB, 2.25 GB, 2.5 GB, 2.75 GB, 3 GB and 3.25 GB.

Memory Scrambler

Select Enabled to enable memory scrambler support for memory error correction.

The settings are

Enabled

and Disabled.



PCH-IO Confi guration

This item displays the information for PCH-IO Chip.

•

Intel PCH Rev ID

•

USB Confi guration

•

USB Devices

EHCI1

Select Enabled to enable EHCI (Enhanced Host Controller Interface) Controller 1

for USB 2.0 support. One EHCI controller must always be enabled. The settings

are

Enabled

and Disabled.

EHCI2

Select Enabled to enable EHCI (Enhanced Host Controller Interface) Controller 2

for USB 2.0 support. One EHCI controller must always be enabled. The settings

are

Enabled

and Disabled.

Legacy USB Support

Select Enabled to support legacy USB devices. Select Auto to disable legacy sup-

port if legacy USB devices are not present. Select Disable to have USB devices

available only for EFI applications. The options are

Enabled,

Disabled and Auto.

Port 60/64 Emulation

Select Enabled to support I/O Port 60h/64h Emulation which will allow a legacy
USB keyboard to be fully supported by an operating system that does not
recognize a USB device. The options are Disabled and

Enabled

XHCI Hand-Off

This item is a work-around solution for operating systems that do not support

XHCI (Extensible Host Controller Interface) hand-off. The XHCI ownership

Содержание MicroCloud 5038ML-H12TRF
















































































































Результаты поиска

Содержание MicroCloud 5038ML-H12TRF

Отзывы:

Похожие инструкции для MicroCloud 5038ML-H12TRF

Бренды по названию

Популярные бренды

Supero MicroCloud 5038ML-H12TRF, Руководство пользователя

Результаты поиска

Содержание MicroCloud 5038ML-H12TRF

Отзывы:

Похожие инструкции для MicroCloud 5038ML-H12TRF

Бренды по названию

Популярные бренды