5-18
S
UPER
S
ERVER 5038ML-H12TRF User's Manual
VGA Enable/Disable (JPG1)
JPG1 allows the user to enable the
onboard VGA connector (through the
KVM). Close pins 1~2 to enable the
VGA. The default setting is Enabled.
Watch Dog RST/NMI Selection
(JWD1)
Watch Dog (JWD1) is a system moni-
tor that can reboot the system when a
software application hangs. Close pins
1~2 to reset the system if an applica-
tion hangs. Close pins 2~3 to generate
a non-maskable interrupt signal for the
application that hangs. See the table on
the right for jumper settings. Watch Dog
must also be enabled in the BIOS.
VGA Enable/Disable
Jumper Settings
Jumper Setting Defi nition
Pins 1-2
Enabled
Pins 2-3
Disabled
Watch Dog
Jumper Settings
Jumper Setting Defi nition
Pins 1-2
Reset
Pins 2-3
NMI
Open
Disabled
Manufacturer Mode Select
Close this jumper (JPME2) to bypass
SPI fl ash security and force the system
to use the Manufacturer Mode, which
allows the user to fl ash the system fi rm-
ware from a host server to modify system
settings. See the table on the right for
jumper settings.
ME Mode Select
Jumper Settings
Jumper Setting Defi nition
Pins 1-2
Normal
Pins 2-3
Manufacture Mode
ME Recovery
Jumper Settings
Jumper Setting Defi nition
Pins 1-2
Normal
Pins 2-3
ME Recovery
ME Recovery
Set Jumper JPME1 to select ME Firm-
ware Recovery Mode, which will limit
system resource for essential function
use only without putting restrictions on
power use. In the single operation mode,
online upgrade will be available via Re-
covery mode. See the table on the right
for pin defi nitions.
Содержание MicroCloud 5038ML-H12TRF
