Supero MBD-X9DBU-3F-B, Руководство пользователя

Страница: 88 / 111

4-16
X9DBU-3F/X9DBU-iF Motherboard User’s Manual
Port 0~5 Hot Plu g
Select Enabled to enable hot-plug support for a particular port, which will
allow the user to change a hardware component or device without shutting
down the system. The options are Enabled and Disabled.
Staggered Spin Up
Select Enabled to enable Staggered Spin-up support to prevent excessive
power consumption caused by multiple HDDs spinning-up simultaneously.
The options are Enabled and Disabled .
RAID Mode
The following items are displayed when RAID Mode is selected:
Port 0~5 Hot Plug
Select Enabled to enable hot-plug support for the particular port. The options
are Enabled and Disabled.

SCU (Storage Control Unit) Confi guration
Storage Controller Unit
Select Enabled to enable PCH SCU storage devices. The options are Disabled
and Enabled .
SCU RAID Option ROM
Select Enabled to support the onboard SCU Option ROM to boot up the system via
a storage device. The options are Disabled and Enabled .
SCU Port 0~SCU Port 7 : The AMI BIOS will automatically detect the onboard SCU
devices and display the status of each SCU device as detected.
Note: iF boards only support SATA drives. 3F boards support both SATA
and SAS drives

PCIe/PCI/PnP Confi guration
PCI ROM Priority
Use this feature to select the Option ROM to boot the system when there are mul-
tiple Option ROMs available in the system. The options are EFI Compatible ROM
and Legacy ROM .