Supero H8QG6-F, Руководство пользователя

Страница: 62 / 84

4-10
H8QG6/i-F Serverboard User’s Manual
System Health Monitor
CPU Overheat Temperature
This setting allows you to specify the type of alarm for CPU overheating. Options
include The Early Alarm and The Default Alarm .
Other items in the submenu are systems monitor displays for the following
information:
CPU1 Temperature, CPU2 Temperature, CPU3 Temperature, CPU4 Tempera-
ture, System Temperature, Fan 1-9 Reading, Chipset FAN1-2, CPU1 VCore,
CPU2 VCore, CPU3 VCore, CPU4 VCore, 3.3V Vcc (V), + 5Vin, +12V Vcc
(V), CPU1~4 DIMM Voltage, Chipset SR56x0 Voltage, 3.3V standby, Battery
Voltage
System Fan Monitor
This submenu contains lists the system fans and contains RPM information for
them.
Fan Speed Control Modes
This submenu allows you to determine how the system will control the speed
of the onboard fans. The options are Full Speed/FS (Max Cooling), Perfor-
mance/PF (Better Cooling), Balanced/BL (Balance between performance and
energy saving), Energy Saving/ES (Lower Power and Noise).
4-4 PCI/PNP Settings Menu
Clear NVRAM
Select Yes to clear NVRAM during boot-up. The options are Yes and No .
Plug & Play O/S
Select Yes to allow the OS to confi gure Plug & Play devices. (This is not required
for system boot if your system has an OS that supports Plug & Play.) Select No to
allow AMIBIOS to confi gure all devices in the system.
PCI Latency Timer
This option sets the latency of all PCI devices on the PCI bus. Select a value to
set the PCI latency in PCI clock cycles. Options are 32, 64 , 96, 128, 160, 192,
224 and 248.