Supero H8DG6, Руководство пользователя

Страница: 35 / 76

Chapter 2: Installation
2-13
ATX PS/2 Keyboard and PS/2 Mouse
Ports
The ATX PS/2 keyboard and PS/2 mouse are
located next to the Back Panel USB Ports 0/1
on the motherboard. See the table at right for
pin defi nitions.
PS/2 Keyboard/Mouse Pin
Defi nitions
PS2 Keyboard PS2 Mouse
Pin# Defi nition Pin# Defi nition
1 KB Data 1 Mouse Data
2 No
Connection 2 No
Connection
3 Ground 3 Ground
4 Mouse/KB
VCC (+5V) 4 Mouse/KB
VCC (+5V)
5 KB Clock 5 Mouse Clock
6 No
Connection 6 No
Connection
VCC: with 1.5A PTC (current limit)
DOM Power Connector
A power connector for SATA DOM (Disk_
On_Module) is located at JWF1. Connect
the appropriate cable here to provide power
support for your DOM devices.
Wake-On-LAN
The Wake-On-LAN header is designated
JWOL1. See the table on the right for pin
defi nitions. You must have a LAN card with
a Wake-On-LAN connector and cable to use
the Wake-On-LAN feature.
Wake-On-LAN
Pin Defi nitions
(JWOL1)
Pin# Defi nition
1 +5V Standby
2 Ground
3 Wake-up
LAN1/2 (Ethernet Ports)
Two Gigabit Ethernet ports (designated LAN1
and LAN2) are located beside the VGA port.
Additionally, for the H8DG6/i-F serverboards,
there is a dedicated LAN for IPMI on top of
the two rear USB ports. These Ethernet ports
accept RJ45 type cables.
DOM PWR
Pin Defi nitions
Pin# Defi nition
1 +5V
2 Ground
3 Ground