Supero C7Z87-OCE, Руководство пользователя

Страница: 75 / 121

Chapter 4: AMI BIOS
4-9
CPU Power Limit3
Use this feature to set the power limit for CPU3. Use the number keys on your
keyboard to enter the value. Enter 0 to use the manufacturer's default setting.
CPU Power Limit3 Time
This item allows the user to determine how long CPU3 should operate at the
power limit set by the user for the item above. Use the number keys on your
keyboard to enter the value. Enter 0 to use the manufacturer's default setting.
CPU Power Limit3 Duty Cycle
This item allows the user to determine the percentage of time CPU3 should
operate at the power set by the user for the item above (i.e., If Power Limit3
Time is set at 100 secs, a 60% duty cycle means CPU3 will run 60 seconds at
the power limit set in Power Limit3 every 100 seconds.). Use the number keys
on your keyboard to enter the value between 1~100. Enter 0 to use the manu-
facturer's default setting.
DDR Power Limit1
Use this feature to set the power limit for DDR Memory Module 1. Use the num-
ber keys on your keyboard to enter the value. Enter 0 to use the manufacture's
default setting.
DDR Power Limit1 Time
This item allows the user to determine how long Memory Module 1 should
operate at the power limit set by the item above. Use the number keys on your
keyboard to enter the value. Enter 0 to use the manufacturer's default setting.
DDR Power Limit2
Use this feature to set the power limit for Memory Module 2. Use the number
keys on your keyboard to enter the value. Enter 0 to use the manufacturer's
default setting.
1-Core Ratio Limit
This increases (multiplies) 1 clock speed in the CPU core in relation to the bus
speed when one CPU core is active. Press "+" or "-" on your keyboard to change
the value. Enter 0 to use the manufacturer's default setting.
2-Core Ratio Limit
This increases (multiplies) 2 clock speeds in the CPU core in relation to the bus
speed when two CPU cores are active. Press "+" or "-" on your keyboard to
change the value. Enter 0 to use the manufacturer's default setting.