Supero AOC-STG-i2T, Руководство пользователя

Страница: 14 / 27

2-4
AOC-STG-i2T Add-on Card User's Guide
2-2 Major Components
The following major components are installed on the AOC-STG-i2T R1.01:
1. Intel® X540 10Gb LAN Controller
2. (RJ45 Ethernet) LAN Port 1 & LAN1 LED Indicator
3. (RJ45 Ethernet) LAN Port 2 & LAN2 LED Indicator
4. 3.3V Standby Power Enable (Jumper)
The following major components are installed on the AOC-STG-i2T R2.00 and
R2.01:
1. Intel® X540 10Gb LAN Controller
2. (RJ45 Ethernet) LAN Port 1 & LAN1 LED Indicator
3. (RJ45 Ethernet) LAN Port 2 & LAN2 LED Indicator
4. Thermal Alert Connector (JP2)
5. DIP Switch (S1)
6. LED1 (Thermal Alert LED Status)
2-3 Differences between Rev. 2.01, Rev. 2.00 and Rev.
1.01
Refer to the table below for the differences between the two revisions.
Rev. 2.01 Rev. 2.00 Rev. 1.01
1. LAN connectors updated 1. Passive heatsink (no fan) 1. Active heatsink (with fan)
2. FH/LP brackets updated 2. Asset Management 2. No Asset Management
3. PCB shortened: 5.9 in. (14.99
cm) x 2.73 in (6.93 cm) (L x H)
3. Both FH and LP brackets are
perforated for better air cooling
3. Non-perforated brackets
4. Card dimension: 6.4 in (16.26 cm)
x 2.73 in (6.93 cm) (L x H)
4. Card dimension: 5.4 in (13.72
cm) x 2.73 in (6.93 cm) (L x H)