Supero 6047R-E1R36L, Руководство пользователя

Страница: 92 / 112

7-18
S
UPER
S
TORAGE
S
YSTEM 6047R-E1R36L User's Manual
Change Settings
This option speci fi es the base I/O port address and the Interrupt Request address of
Serial Port 2. Select Disabled to prevent the serial port from accessing any system
resources. When this option is set to Disabled, the serial port becomes unavailable.
The options are
Auto
, IO=3F8h; IRQ=4; IO=3F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;
IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12; IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11,
12; and IO=2E8h, and IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12.
Device Mode
Use this feature to select the desired mode for a serial port speci fi ed. The options
are
Normal
and High Speed.
Serial Port 2 Attribute
Use this feature to select the attribute for this serial port. The options are
SOL
(Serial Over LAN), and COM.
X
Serial Port Console Redirection
COM1, COM2/SOL
These two submenus allow the user to con fi gure the following Console Redirection
settings for a COM Port speci fi ed by the user.
Console Redirection
Select Enabled to use a COM Port selected by the user for Console Redirection.
The options are
Enabled and Disabled. The default setting for COM1 is
Disabled
,
and for COM2/SOL is
Enabled
.
X
Console Redirection Settings
This feature allows the user to specify how the host computer will exchange
data with the client computer, which is the remote computer used by the user.
Terminal Type
This feature allows the user to select the target terminal emulation type for Con-
sole Redirection. Select VT100 to use the ASCII Character set. Select VT100+ to
add color and function key support. Select ANSI to use the Extended ASCII Char-
acter Set. Select VT-UTF8 to use UTF8 encoding to map Unicode characters
into one or more bytes. The options are VT100,
VT100+
, VT-UTF8, and ANSI.
Bits Per second
Use this feature to set the transmission speed for a serial port used in Console
Redirection. Make sure that the same speed is used in the host computer and the