Supero 6027R-E1R12N страница 75 Скачать руководство пользователя

Страница: 75 / 112

Chapter 7: BIOS

7-1

Chapter 7

BIOS

7-1 Introduction

This chapter describes the AMI BIOS Setup utility for the X9DR6-LN4F+/X9DRi-
LN4F+. It also provides the instructions on how to navigate the AMI BIOS Setup

utility screens. The AMI ROM BIOS is stored in a Flash EEPROM and can be

easily updated.

Starting BIOS Setup Utility

To enter the AMI BIOS Setup utility screens, press the <F2> key while the system

is booting up.

In most cases, the <F2> key is used to invoke the AMI BIOS setup screen. There

are a few cases when other keys are used, such as <F8>, <F9>, etc.

Each main BIOS menu option is described in this manual. The Main BIOS setup

menu screen has two main frames. The left frame displays all the options that can

be confi gured. Grayed-out options cannot be confi gured. Options in blue can be

confi gured by the user. The right frame displays the key legend. Above the key

legend is an area reserved for a text message. When an option is selected in the

left frame, it is highlighted in white. Often a text message will accompany it.

The AMI BIOS has default text messages built in. The manufacturer retains the

option to include, omit, or change any of these text messages.

The AMI BIOS Setup utility uses a key-based navigation system called "hot keys."

Most of the AMI BIOS setup utility "hot keys" can be used at any time during setup

navigation. These keys include <F1>, <F10>, <Enter>, <ESC>, arrow keys, etc.

Options printed in

Bold

are default settings.

How To Change the Confi guration Data

The confi guration data that determines the system parameters may be changed by

entering the AMI BIOS Setup utility. This Setup utility can be accessed by pressing

<F2> at the appropriate time during system boot.

Note

: For AMI UEFI BIOS Recovery, please refer to the UEFI BIOS Recovery User

Guide posted @http://www.supermicro.com/support/manuals/.

Содержание 6027R-E1R12N

















































































































Результаты поиска

Содержание 6027R-E1R12N

Отзывы:

Похожие инструкции для 6027R-E1R12N

Бренды по названию

Популярные бренды

Supero 6027R-E1R12N, Руководство пользователя

Результаты поиска

Содержание 6027R-E1R12N

Отзывы:

Похожие инструкции для 6027R-E1R12N

Бренды по названию

Популярные бренды