Supero 6027R-E1R12N страница 81 Скачать руководство пользователя

Страница: 81 / 112

Chapter 7: BIOS

7-7

based on the specifi cations of the application running in the system at the time. The

options are Disabled and

Enabled

Intel® Virtualization Technology (Available when supported by the CPU)

Select Enabled to support Intel Virtualization Technology, which will allow one

platform to run multiple operating systems and applications in independent parti-

tions, creating multiple "virtual" systems in one physical computer. The options

are

Enabled

and Disabled.

Note

: If there is any change to this setting, you will need to power off and

restart the system for the change to take effect. Please refer to Intel’s

website for detailed information.)



CPU Power Management Confi guration

This submenu allows the user to confi gure the following CPU Power Manage-

ment settings.

Power Technology

Select Energy Effi ciency to support power-saving mode. Select Custom to cus-

tomize system power settings. Select Disabled to disable power-saving settings.

The options are Disabled, Energy Effi ciency, and

Custom

EIST

EIST (Enhanced Intel SpeedStep Technology) allows the system to automatically

adjust processor voltage and core frequency to reduce power consumption and

heat dissipation. The options are Disabled (GV3 Disabled), and

Enabled (GV3

Enabled)

. (

Note

: GV3 is Intel Speedstep support used on older platforms.)

Please refer to Intel’s website for detailed information.)

Turbo Mode (Available when Intel® EIST Technology is enabled)

Select Enabled to use the Turbo Mode to boost system performance. The options

are

Enabled

and Disabled.

P-State Coordination

This feature allows the user to change the P-State (Power-Performance State)

coordination type. P-State is also known as "SpeedStep" for Intel processors. Se-

lect HW_ALL to change the P-State coordination type for hardware components

only. Select SW_ALL to change the P-State coordination type for all software

installed in the system. Select SW_ANY to change the P-State coordination

type for a software program in the system. The options are

HW_All,

SW_ALL,

and SW_ANY.

Содержание 6027R-E1R12N

















































































































Результаты поиска

Содержание 6027R-E1R12N

Отзывы:

Похожие инструкции для 6027R-E1R12N

Бренды по названию

Популярные бренды

Supero 6027R-E1R12N, Руководство пользователя

Результаты поиска

Содержание 6027R-E1R12N

Отзывы:

Похожие инструкции для 6027R-E1R12N

Бренды по названию

Популярные бренды