6-12
A+ SERVER 2022TG-H6IBQRF/H6RF USER'S MANUAL
5. Make sure that the I/O ports on the serverboard align properly with their
respective holes in the I/O shield at the back of the chassis.
6. Lay the motherboard in the node drawer aligning the standoffs with the
mother board.
7. Secure the motherboard to the node drawer using the rounded, Phillips head
screws included for this purpose.
8. Install the adapter card associated with the motherboard if the chassis is a
hot-swappable version. Refer to the next section for instructions on installing
the adapter card
9. Secure the CPU(s), heatsinks, and other components to the motherboard as
described in the motherboard documentation.
10. Connect the cables between the motherboard, backplane, chassis, front
panel, and power supply, as needed. Also, fans may be temporarily removed
to allow access to the backplane ports.
11. Replace the add-on card bracket and secure the bracket with a screw.
12. Repeat steps 3 - 11 for the remaining nodes.
13. Connect the AC power cord and power up the system.
Caution:
Do not slide serverboar into the tray as this will damage components on the
bottom of the board.
Caution:
To avoid damaging the motherboard and its components, do not apply any
force greater than 8 lbs. per square inch when installing a screw into a mounting hole.
Figure 6-11. Installing the Motherboard in the Motherboard Node Drawer
Note:
The node drawing is an example only, actual layout differs slightly.
Содержание 2022TG-H6IBQRF
