manualshive.com logo in svg

Supero 1028GQ-TR, Руководство пользователя, Страница: 9 / 146

Поделиться
Скачать
Supero 1028GQ-TR Скачать руководство пользователя страница 9

Chapter 1  

 

Introduction

1-1 Overview 

The SuperServer 1028GQ-TR(T) is a high-end GPU server comprised of two main 
subsystems: the SC118GQE-R2K03P 1U server chassis and the X10DGQ dual 
processor motherboard. It supports up to four GPUs, either actve or passive. Refer 
to the Supermicro web site for information on operating systems that have been 

certified for use with the system (

www.supermicro.com

). 

1028GQ-TR(T) Models

System

LAN Ports

Add-on Module

1028GQ-TR

Two 1Gbit

 AOM-PIO-I2G

1028GQ-TRT

Two 10Gbit

 AOM-PIO-I2XT-P

In addition to the above components, the server includes: 

• 

Add-on Module (AOM-PIO-I2G or AOM-PIO-I2XT-P)

• 

SAS3 backplane supporting two drives (BPN-SAS3-118GQE)

• 

Nine 4-cm system cooling fans (FAN-0163L4)

• 

Two passive CPU heatsinks (SNK-P0057P)

• 

Air shroud set (MCP-310-11805)

• 

Riser Cards: 
Three for front GPU (RSC-G-6) 
One for rear GPU (RSC-GR-6)  

One for low-profile add-on card (RSC-GR-A88)  

Note: 

For your system to work properly, please follow the links below to download 

all necessary drivers/utilities and the user’s manual for your server.

• 

Supermicro product manuals: 

http://www.supermicro.com/support/manuals/

• 

Product drivers and utilities: 

ftp://ftp.supermicro.com

• 

Product safety info: 

 

http://www.supermicro.com/about/policies/safety_information.cfm

For support, email 

[email protected].

Chapter 1: Introduction

1-1

Содержание 1028GQ-TR



















































































































































Отзывы:

Нет отзывов