Supero 1028GQ-TR, Руководство пользователя, Страница: 21 / 146

Chapter 2: Server Installation
2-7
Installing and Removing the Chassis From a Rack
Installing the Chassis into a Rack
1. Align the rear of the chassis rails with the front of the rack rails and then push
evenly on both sides of the chassis. The spring latch engages when the chassis
is part way in. Push the server completely into the rack.
2. (
Optional
) Insert and tighten the thumbscrews that hold the front of the server
to the rack.
Removing the Chassis From a Rack
1. Press the outer rail latch to release the chassis.
2. Carefully slide the chassis forward, off the outer rails and out of the chassis.
Figure 2-5. Server Installation and Removal
A
L_min= 638.3(25.1") (OUTER RAIL)
L_min=( 786.4)(31")
L_max= 840.0(33.0") (OUTER RAIL)
( 1538.8)(60.6") (INNER RAIL)
Screw_M5.0
L_max= 840.0(33.0") (OUTER RAIL)
INNER RAIL_FRONT
INNER RAIL_BACK
Outer Rail
Latch
Note:
The figure above is for illustrative purposes only. Always install servers at
the bottom of the rack first.
Warning
: Do not pick up the server with the front handles. They are designed
to pull the system from a rack only.