Supermicro X7DCT Скачать руководство пользователя страница 50

Страница: 50 / 82

3-4

X7DCT/X7DCT-10G User's Manual

your computer. Unzip the BIOS fi les onto a bootable fl oppy and reboot your system.

Follow the Readme.txt to continue fl ashing the BIOS.

Warning

: Do not shut down or reset the system while updating BIOS to

prevent possible system boot failure!

Note

: The onboard SPI BIOS chip is not removable. To repair or replace

the SPI BIOS chip, please return your motherboard to RMA Dept. at

Supermicro for service.

Question:

What's on the CD that came with my motherboard?

Answer:

The supplied compact disc has quite a few drivers and programs that will

greatly enhance your system. We recommend that you review the CD and install

the applications you need. Applications on the CD include chipset drivers for the

Windows OS, and security and audio drivers.

3-4 Returning Merchandise for Service

A receipt or copy of your invoice marked with the date of purchase is required be-

fore any warranty service will be rendered. You can obtain service by calling your

vendor for a Returned Merchandise Authorization (RMA) number. When returning

to the manufacturer, the RMA number should be prominently displayed on the

outside of the shipping carton, and mailed prepaid or hand-carried. Shipping and

handling charges will be applied for all orders that must be mailed when service

is complete.

This warranty only covers normal consumer use and does not cover damage in-

curred in shipping or from failure due to the alternation, misuse, abuse or improper

maintenance of products.

During the warranty period, contact your distributor fi rst for any product problems.

Содержание X7DCT



















































































Результаты поиска

Содержание X7DCT

Отзывы:

Похожие инструкции для X7DCT

Бренды по названию

Популярные бренды

Supermicro X7DCT, Руководство пользователя

Результаты поиска

Содержание X7DCT

Отзывы:

Похожие инструкции для X7DCT

Бренды по названию

Популярные бренды