Supermicro X6QT8, Руководство пользователя

Страница: 11 / 110

Chapter 1: Introduction
1-5
Jumper Description Default Setting
J27 Processor Speed Strapping Enable On (Enabled)(*Chpt.2)
JBT1 CMOS Clear See Chapter 2
JFSB1 Front Side Bus Speed Select
Off (200 MHz)
JP13 3rd Power Supply Fail Detect Off (Disabled)
JPA1 SCSI Controller Enable Pins 1-2 (Enabled)
JPA2/JPA3 SCSI Chan.A/Chan.B Term. Enable Off (Enable)
JPG1 VGA Enable Pins 1-2 (Enabled)
JPL1 LAN1/LAN 2 Enable/Disable Pins 1-2 (Enabled)
JWD1 Watch Dog Enable Pins 1-2 (Reset)
Connector Description
ATX PWR Primary 24-pin ATX PWR Connector (JPW1) (Required)
8-pin PWR 12V 8-pin PWR Connectors (JPW2/JPW3) (Required)
Alarm Reset Power Supply Alarm Reset (JAR1)
Chassis Intrusion Chassis Intrusion Header (JL1)
COM1/COM2 COM1/COM2 Serial Port Connector/Header
Compact Flash PWR Compact Flash PWR (JWF1:IDE1, JWF2:IDE2)
DIMM A1-B8 Memory (RAM) Slots (*See Pg. 2-6 in Chapter 2.)
FAN 1-9 CPU/Chassis/System Fan Headers
Floppy Floppy Disk Drive Connector
FP CTRL Front Control Panel Connector (JF1)
GLAN 1/2 G-bit Ethernet Ports
IDE1, IDE2 IDE 1 & 2 Connectors (Compact Flash Card supported)
IPMI IPMI 2.0 Socket
JTAG JTAG Connector for the CPLD (JP2) (*Note 6, Pg 1-4)
KB/MS PS/2 Keyboard/Mouse
PWR LED/SPKR PWR LED (Pins1-3), Speaker (Pins 5-7) (JD1)
PWR Supply Fail PWR Supply Failure Header (J3P1)
PWR SMB (PSSMB) Power SMB I
2
C (System Management Bus)
SCSI SCSI Channel A (JA1), Channel B (JA2) Connectors
SMB SMBus (System Management Bus) (J22)
Slot1 Slot1: PCI-X 100 ZCR (*See Note 7 on Pg. 1-4)
Slot2-Slot4 PCI-X133MHz slots
Slot5, Slot6 PCI-Ex4 in x8 Slot (Slot 5), PCI-Ex8 in x16 slot (Slot 6)
Speaker (SPKR) Internal Buzzer
I-SATA1/2 Intel Serial ATA0 (JS1), Serial ATA1 (JS2) Connectors
USB 0/1/2/3 Back Panel USB Ports (0/1), Front Panel USB (2/3)
VGA VGA Connector
WOL Wake-on-LAN Header (JWOL1)
WOR Wake-on-Ring Header (JWOR1)
(* Note : For CPU and Memory Installation, please Notes 8, 9 on Page 1-4.)
Quick Reference (X6QT8)