Appendix C: Software Installation Instructions
C-11
Adding/Deleting Hotspares
(*Note: In order to rebuild a RAID (RAID 0 or RAID 1), you would need to add
a new HDD as a hotspare.)
1.
Turn on your computer and press Ctrl+A as prompted to access the ARC
Utility.
2.
From the ARC menu, select Array Configuration Utility (ACU).
3.
From the ACU menu, select Add/Delete Hotspares.
4.
Use the up and down arrow keys to highlight and select the disk you want
to designate as a hotspare, and press <Insert>, and then, press <Enter>.
5.
Press yes when the following prompt is displayed:
"Do you want to create spare?" (Yes/No?)
The spare you have selected will appear in the Select Drive Menu.
