Supermicro X6DHP-8G2, Руководство пользователя

Страница: 27 / 104

Chapter 2: Installation
2-7
To Remove:
Use your thumbs to gently push near the edge of both ends
of the module. This should release it from the slot.
2-4 I/OPorts/Control Panel Connectors
The I/O ports are color coded in conformance with the PC 99 specification.
See Figure 2-3 below for the colors and locations of the various I/O ports.
Figure 2-3. I/O Port Locations and Definitions
DDRII Top View
Note: Notch
should align
with the
receptive point
on the slot
Notch Notch
Release
Tab
Release
Tab
DDR II
Figure 2-2. Installing and Removing DIMMs
To Install:
Insert module
vertically and
press down
until it snaps
into place.
Pay attention
to the
alignment
notch at the
bottom.
(*X6DHP-8G2 Only)
UID UID