Supermicro X6DAL-XG Скачать руководство пользователя страница 58

Страница: 58 / 108

4-6

X6DAL-XG

User’s Manual

S-ATA Ports Definition

This feature allows the user to configure Serial ATA Ports. The options
are: P0-Master/P1-Slave, P0-Slave/P1-Master

P-ATA Only

S-ATA Running Enhanced Mode

Select Yes if you want the function of Serial ATA Enanced Mode to be
enabled at all times. Options are Yes and No.

P-ATA Channel Selection

This feature allows the user to select which channel to set the Parallel
ATA Mode. The options are: Primary, Secondary or Both.

S-ATA Ports Definition

This feature allows the user to configure Serial ATA Ports. The options
are: P0-3rd/P1-4th, P0-4th/P1-3rd

Configuring S-ATA as RAID

Select Yes to configure Serial ATA as RAID. The options are Yes, and
No.

S-ATA Only

S-ATA Ports Definition

This feature allows the user to configure Serial ATA Ports. The options
are: P0-1st/P1-2nd, P0-2nd/P1-1st

Primary IDE Master/Slave, Secondary IDE Master/Slave, Third IDE
Master/Slave, Fourth IDE Master/Slave Sub Menu

From the Advanced Setup screen, press <Enter> to access this sub menu

for the primary, secondary, third and fourth IDE master and slave drives.

Use this screen to select options for the Primary and Secondary IDE drives.

Use the up and down <Arrow> keys to select an item. Use the <Plus> and

<Minus> keys to change the value of the selected option.

Type

This feature allows the user to select the type of device connected to

the system. The options are Not Installed, Auto, CDROM and ARMD.

Содержание X6DAL-XG













































































































Результаты поиска

Содержание X6DAL-XG

Отзывы:

Похожие инструкции для X6DAL-XG

Бренды по названию

Популярные бренды

Supermicro X6DAL-XG, Руководство пользователя

Результаты поиска

Содержание X6DAL-XG

Отзывы:

Похожие инструкции для X6DAL-XG

Бренды по названию

Популярные бренды