Supermicro X5DPA-8GG, Руководство пользователя

Страница: 59 / 86

Chapter 4: AMIBIOS
4-9
Keyboard Clock Setting
Select "Enabled" to allow the user set the keyboard clock Setting. The op-
tions are "Enabled", and " Disabled "
.
! !
! !
!
System Frequency Display
This feature allows the BIOS to display the status, and the frequency of
Front Side Bus, Memory and PCI slots.
!
PCI/PnP Configuration
Plug & Play O/S
Select "Yes" to allow the operating system to configure Plug & Play devices
that are not required when booting up the system, if the function of Plug &
Play is supported by the OS. Select "No" to allow the BIOS to configure
Plug & Play devices when the system is booting up. The options are "Yes",
and " No ".
PCI Latency Timer
This option sets the latency of all PCI devices on the PCI bus. The default
setting is "64." Select "32" to set the PCI latency to 32 PCI clock cycles.
Select "64" to set the PCI latency to 64 PCI clock cycles. Select "96" to set
the PCI latency to 96 PCI clock cycles. Select "128" to set the PCI latency to
128 PCI clock cycles. Select "160" to set the PCI latency to 160 PCI clock
cycles. Select "192" to set the PCI latency to 192 PCI clock cycles. Select
"224" to set the PCI latency to 224 PCI clock cycles. Select "248" to set the
PCI latency to 248 PCI clock cycles.
Allocate IRQ to PCI VGA
Set this value to allow or restrict the system from giving the VGA adapter
card an interrupt address. The options are " Yes " and "No".
Palette Snooping
Set this value to allow the system to modify the Palette Snooping settings.
The default setting is "Disabled". This setting should not be changed unless
the VGA card manufacturer indicates otherwise. Select "Enabled" to inform
the PCI devices that an ISA based Graphics device is installed in the system
so that the ISA based Graphics card will function correctly. Always check
with your adapter card’s manuals first, before modifying the default settings
in the BIOS. The options are "Enabled" and " Disabled ."