Supermicro X5DPA-8GG Скачать руководство пользователя страница 54

Страница: 54 / 86

4-4

UPER X5DPA-8GG

User’s Manual

Block (Multi-Sector Transfer)

Block mode boosts IDE drive performance by increasing the amount of data

transferred. Only 512 bytes of data can be transferred per interrupt if block

mode is not used. Block mode allows transfers of up to 64 KB per interrupt.

Select "Disabled" to allow the data to be transferred from and to the device

one sector at a time. Select "Auto" to allows the data transfer from and to

the device occur multiple sectors at a time if the device supports it. The

options are "

Auto

" and "Disabled".

PIO Mode

IDE PIO (Programmable I/O) mode programs timing cycles between the IDE

drive and the programmable IDE controller. As the PIO mode increases, the

cycle time decreases. The options are "

Auto

", "0", "1", "2", "3", and "4".

Select Auto to allow the BIOS to auto detect the PIO mode. Use this value if

the IDE disk drive support cannot be determined. Select 0 to allow the BIOS

to use PIO mode 0. It has a data transfer rate of 3.3 MBs. Select 1 to allow

the BIOS to use PIO mode 1. It has a data transfer rate of 5.2 MBs. Select

2 to allow the BIOS to use PIO mode 2. It has a data transfer rate of 8.3

MBs. Select 3 to allow the BIOS to use PIO mode 3. It has a data transfer

rate of 11.1 MBs. Select 4 to allow the BIOS to use PIO mode 4. It has a data

transfer rate of 16.6 MBs. This setting generally works with all hard disk

drives manufactured after 1999. For other disk drives, such as IDE CD-ROM

drives, check the specifications of the drive.

allow the BIOS to use Single Word DMA mode 0. It has a data transfer rate

of 2.1 MBs. Select SWDMA1 to allow the BIOS to use Single Word DMA

mode 1. It has a data transfer rate of 4.2 MBs. Select SWDMA2 to allow the

BIOS to use Single Word DMA mode 2. It has a data transfer rate of 8.3

MBs. Select MWDMA0 to allow the BIOS to use Multi Word DMA mode 0. It

has a data transfer rate of 4.2 MBs. Select MWDMA1 to allow the BIOS to

use Multi Word DMA mode 1. It has a data transfer rate of 13.3 MBs. Select

MWDMA2 to allow the BIOS to use Multi-Word DMA mode 2. It has a data

transfer rate of 16.6 MBs. Select UDMA0 to allow the BIOS to use Ultra DMA

mode 0. It has a data transfer rate of 16.6 MBs. It has the same transfer

rate as PIO mode 4 and Multi Word DMA mode 2. Select UDMA1 to allow
the BIOS to use Ultra DMA mode 1. It has a data transfer rate of 25 MBs.

Select UDMA2 to allow the BIOS to use Ultra DMA mode 2. It has a data

transfer rate of 33.3 MBs.

The Options are "

Auto

", "SWDMA0", "SWDMA1", "SWDMA2", "MWDMA0",

"MWDMA1", "MWDMA2","UDMA0", "UDMA1", and "UDMA2".

Select Auto to allow the BIOS to auto detect the DMA mode. Use this value

if the IDE disk drive support cannot be determined. Select SWDMA0 to

DMA Mode

Содержание X5DPA-8GG























































































Результаты поиска

Содержание X5DPA-8GG

Отзывы:

Бренды по названию

Популярные бренды

Supermicro X5DPA-8GG, Руководство пользователя

Результаты поиска

Содержание X5DPA-8GG

Отзывы:

Бренды по названию

Популярные бренды