Supermicro X5DP8-G2, Руководство пользователя

Страница: 36 / 88

2-12
SUPER X5DP8-G2/DPE-G2/DPR-8G2+/DPR-iG2+/DPi-G2 User's Manual
Third Power Supply Fail
Header
Connect a cable from your power
supply to the JP8 header to pro-
vide warning of power supply fail-
u r e . T h i s w a r n i n g s i g n a l i s
passed through the PWR_LED pin
on JF2 to indicate of a power fail-
ure on the chassis. See the table
on the right for pin definitions.
T hird Pow er Supply Fail Header
Pin Definitions (JP8)
Pin
Number
1
2
3
4
Definition
P/S 1 Fail Signal
P/S 2 Fail Signal
P/S 3 Fail Signal
Reset (from MB)
Note: This feature is only available when using
redundant Supermicro power supplies.
Power LED/Speaker/NMI
On the JDI header, pins 1-3 are
for a power LED, pins 4-7 are for
the speaker and pins 8-9 are for
the NMI connection. See the table
on the right for speaker pin defini-
tions. Note: The speaker connec-
tor pins are for use with an exter-
nal speaker. If you wish to use
the onboard speaker, you should
close pins 6-7 with a jumper.
Speaker Connector Pin
Definitions (JD1)
Pin
Number
4
5
6
7
Function
+
Key
Definition
Red wire, Speaker data
No connection
Key
Speaker data
Fan Header Pin Definitions
Pin
Number
1
2
3
Definition
G round (black)
+12V (red)
Tachometer
Caution: These fan headers
are DC power.
Fan Headers
The X5DP8-G2/X5DPE-G2/X5DPi-
G2 has six and the X5DPR-8G2+/
X5DPR-iG2+ has three CPU and
chassis fan headers. Designa-
tions include CPU Fan1, CPU Fan2,
CPU1 Chassis Fan, CPU2 Chassis
Fan, Chassis Fan1, Chassis Fan2
and Overheat Fan. See the table
on the right for pin definitions.