Supermicro X5DP8-G2, Руководство пользователя

Страница: 34 / 88

2-10
SUPER X5DP8-G2/DPE-G2/DPR-8G2+/DPR-iG2+/DPi-G2 User's Manual
Power Button
The Power Button connection is
located on pins 1 and 2 of JF2.
Momentarily contacting both pins
will power on/off the system. This
button can also be configured to
function as a suspend button (see
the Power Button Mode setting in
B I O S ) . T o t u r n o f f t h e p o w e r
when set to suspend mode, de-
press the button for at least 4
seconds. Refer to the table on the
right for pin definitions.
Pin
Number
1
2
Definition
PW _O N
G round
Pow er Button
Connector
Pin Definitions
(JF2)
Universal Serial Bus
(USB0/1)
Two Universal Serial Bus ports
are located beside the PS/2 key-
board/mouse ports. USB0 is the
bottom connector and USB1 is the
top connector. See the table on
the right for pin definitions.
Universal Serial Bus Pin Definitions
Pin
Number
Definition
1 +5V
2 P0-
3 P0+
4 G round
5 N/A
Pin
Number
Definition
1 +5V
2 P0-
3 P0+
4 G round
5 Key
USB0
USB1
Reset Button
The Reset Button connection is lo-
cated on pins 3 and 4 of JF2. At-
t a c h i t t o t h e h a r d w a r e r e s e t
s w i t c h o n t h e c o m p u t e r c a s e .
Refer to the table on the right for
pin definitions.
Chassis Intrusion
A Chassis Intrusion header is lo-
cated at JL1. Attach the appropri-
ate cable to inform you of a chas-
sis intrusion.
Pin
Number
3
4
Definition
Reset
G round
Reset Pin
Definitions
(JF2)