Super X12SCQ User's Manual
88
RAID Device ID
Use this feature to select the RAID device ID. The options are
iRST Mode
and Alternate.
Storage Option ROM/UEFI Driver
Select UEFI to load the EFI driver for system boot. Select Legacy to load a legacy driver for
system boot. The options are Do not Launch,
EFI
, and Legacy.
Teton Glacier Mode
Use this feature to enable or disable Intel Optane memory with solid state storage. The options
are Dynamic Configuration for Hybrid Storage Device Enable and
Disabled
.
Aggressive LPM Support
When this feature is set to Enable, the SATA AHCI controller manages the power usage of
the SATA link. The controller will put the link in a low power mode during extended periods of
I/O inactivity, and will return the link to an active state when I/O activity resumes. The options
are Disabled and
Enabled
.
Serial ATA Port 0-5
This feature displays the information detected on the installed SATA drive on the particular
SATA port.
•
Software Preserve Support
SATA Port 0-5 Hot Plug
Set this feature to Enable for hot plug support, which will allow the user to replace a SATA
drive without shutting down the system. The options are Disabled and
Enabled
.
SATA Port 0-5 Spin Up Device
Set this feature to enable or disable the PCH to initialize the device. The options are
Disabled
and Enabled.
SATA Port 0-5 SATA Device Type
Use this feature to specify if the SATA port specified by the user should be connected to a
Solid State Drive or a Hard Disk Drive. The options are
Hard Disk Drive
and Solid State
Drive.
Serial Port Console Redirection
COM1 Console Redirection
Select Enabled to enable console redirection support for a serial port specified by the user.
The options are Enabled and
Disabled
.