Super X12DPG-QR User's Manual
104
sSATA RAID Option ROM/UEFI Driver (Available when "Configure sSATA as" is set
to RAID)
Select EFI to load the EFI driver for system boot. Select Legacy to load a legacy driver for
system boot. The options are Disable,
EFI
, and Legacy.
sSATA Port 0 - sSATA Port 5
Hot Plug
Select Enable to support Hot-plugging for the device installed on an sSATA port specified by
the user which will allow the user to replace the device installed in the slot without shutting
down the system. The options are Disable and
Enable
.
Spin Up Device
Select Enable for Staggered Spin Up support to allow the SATA devices specified by the
user to spin up one at a time at bootup which will prevent all hard drive disks from spinning
up at the same time, causing a power surge. The options are Disable and
Enable
.
sSATA Device Type
Use this feature to specify if the device installed on the sSATA port specified by the user
should be connected to a Solid State drive or a Hard Disk Drive. The options are
Hard
Disk Drive
and Solid State Drive.
