Supermicro X11DPH-i, Руководство пользователя

Страница: 15 / 135

15
Chapter 1: Introduction
Motherboard Features
CPU
•
Supports dual 81xx/61xx/51xx/41xx/31xx Series processors (Socket P); each processor supports an Intel® UltraPath
Interconnect (UPI) of up to 10.4 GT/s.
(
Note
: X11DPH-Tq supports QAT)
Note:
Both CPUs need to be installed for full access to the PCI-E slots, DIMM slots, and onboard controllers. Refer
to the block diagram on page 16 to determine which slots or devices may be affected.
Memory
•
Integrated memory controller supports up to 2TB of Registered DIMM (RDIMM), Load Reduced DIMM (LRDIMM), 3D
LRDIMM, Non-Volatile DIMM (NV-DIMM) DDR4 (288-pin) ECC memory with speeds of up to 2666MHz in 16 slots.
DIMM Size
•
Up to 128GB at 1.2V
Note 1: Memory speed support depends on the processors used in the system.
Note 2: For the latest CPU/memory updates, please refer to our website at http://www.supermicro.com/products/
motherboard.
Chipset
•
Intel C622/C624/C628 PCH (C622: is for X11DPH-i, C624 for X11DPH-T, and C628: X11DPT-Tq.)
Expansion Slots
•
Four (4) PCI-Express 3.0 X8 slots supported by CPU1 ( SLOT1, SLOT3, SLOT6, SLOT7 3; No Slot1 for X11DPH-Tq)
•
Three (3) PCI-Express 3.0 X16 slots supported by CPU2 (SLOT2, SLOT4, SLOT5)
Baseboard Management Controller (BMC)
•
ASpeed AST2500 BMC with IPMI 2.0 support
Graphics
•
Graphics controller via ASpeed AST2500 BMC
Network Connection
•
Intel C628/x722 supports two 10 Gigabit LAN ports on the X11DPH-Tq
•
Intel C624/x722 supports two 10 Gigabit LAN ports on the X11DPH-T
•
Intel C622/x722 supports two Gigabit LAN ports (X11DPH-i)
•
One (1) Dedicated IPMI LAN located on the rear I/O panel
I/O Devices
•
Serial (COM) Port
•
One (1) serial port on the rear I/O panel
•
SATA 3.0
•
Eight (8) SATA 3.0 ports (I-SATA0~3, I-SATA4~7)
•
Two (2) SATA 3.0 ports with SATA DOM power (S-SATA0, S-SATA1)
•
RAID (PCH)
•
RAID 0, 1, 10
Motherboard Features