29
Chapter 2: DCPMM Memory Installation
6. Press the release tabs to the lock positions to secure the DIMM module into the slot.
Note
: All graphics included in this user's guide are for illustration only. Your system
components may or may look exactly the same as the graphics shown in this user's
guide.
DIMM Module Installation
1. Insert the desired number of DIMMs into the memory slots based on the recommended
DIMM population tables on the previous page.
2. Push the release tabs outwards on both ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the receptive point on the memory slot.
Release Tabs
Notches
DIMM Removal
Press both release tabs on the ends of the DIMM module to unlock it. Once the DIMM module
is loosened, remove it from the memory slot.
Warning!
Please do not use excessive force when pressing the release tabs on the ends of the DIMM
socket to avoid causing any damage to the DIMM module or the DIMM socket. Please handle DIMM
modules with care. Carefully follow all the instructions given on Page 1 of this chapter to avoid ESD-
related damages done to your memory modules or components.
4. Align the notches on both ends of the module against the receptive points on the ends
of the slot.
Push both ends straight down into the memory slot.
5. Press both ends of the module straight down into the slot until the module snaps into
place.
Key
Key (Receptive Point)
