Supermicro X10SDV-F, Руководство пользователя

Страница: 3 / 111

iii
Preface
This manual is written for system integrators, IT technicians and
knowledgeable end users. It provides information for the installation and use of the
X10SDV-TLN4F/F motherboard.
About This Motherboard
The X10SDV-TLN4F/F motherboard supports an Intel ® Xeon ® D-1540
SoC (System-on-a-Chip) processor in a BGA package. The X10SDV-TLN4F/F
Mini-ITX motherboards address a low-power, high-density infrastructure need with
8 Xeon cores and 128 GB of addressable memory, two integrated 10 Gigabit Intel
Ethernet ports (-TLN4F only), M.2 SSD, USB 3.0 and a thermal design up to 45
watts only. The X10SDV series motherboards provide software consistency from
the data center to the storage and network edge with the same instruction set as
the robust Xeon processor.
Please refer to our website at (http://www.supermicro.com/products/) for memory
support updates. This product is intended to be installed and serviced by profes-
sional technicians.
Manual Organization
Chapter 1 describes the features, specifications and performance of the mother -
board, and provides detailed information on the Intel Xeon D-1500 Series processor.
Chapter 2 provides hardware installation instructions. Read this chapter when in-
stalling the processor, memory modules and other hardware components into the
system. If you encounter any problems, see
Chapter 3 , which describes trouble-
shooting procedures for video, memory and system setup stored in the CMOS.
Chapter 4 includes an introduction to the BIOS, and provides detailed information
on running the CMOS Setup utility.
Appendix A provides BIOS Error Beep Codes.
Appendix B lists software program installation instructions .
Appendix C contains UEFI BIOS Recovery instructions.
Appendix D contains Dual Boot Block instructions.
Preface