Supermicro X10DRX, Руководство пользователя

Страница: 14 / 121

Chapter 1: Overview
1-5
X10DRX Jumpers
Jumper
Description Default Setting
JBT1 Reset BIOS Configuration See Chapter 2
JI
2
C1/JI
2
C2 SMB to PCI-E Slots Pins 2-3 (Disabled)
JPB1 BMC Enable Pins 1-2 (Enabled)
JPG1 VGA Enable Pins 1-2 (Enabled)
JPL1 LAN 1/2 Enable Pins 1-2 (Enabled)
JPME2 ME Manufacturing Mode Select Pins 1-2 (Normal)
JWD1 Watch Dog Timer Enable Pins 1-2 (Reset)
X10DRX Connectors
Connectors Description
Battery (JBAT1) Onboard CMOS battery (See Chpt. 3 for used battery disposal)
COM1/COM2 Backplane COM port1/Serial connector header 2
Fan1-7, A-D CPU/system fan headers (FAN6: CPU1 fan, FAN7: CPU2 fan)
JF1 Front panel control header
JL1 Chassis Intrusion header
JIPMB1 4-pin external BMC I
2
C header (for an IPMI card)
JSD1/JSD2 3-pin power connectors for SATA DOM (Device on Module) devices (external
power required)
JTPM1 TPM (Trusted Platform Module)/Port 80 header
JUIDB1 UID (Unit Identification) button
JNVI2C1/2 VPP header for NVMe add-on cards (AOC)
IPMI_LAN IPMI_dedicated LAN support by the Aspeed controller
JSTBY1 Standby power connector
LAN1/LAN2 Gigabit LAN Ethernet ports 1/2
JPI
2
C1 Power supply SMBus I
2
C header
JPWR1 24-pin ATX main power connector (See Warning on Pg. 1-6)
JPWR2/3 12V 8-pin power connectors (See Warning on Pg. 1-6)
JPWR4 12V 4-pin power connector
I-SATA0-5 SATA 3.0 connectors supported by Intel PCH (I-SATA4/I-SATA5: support Su -
perDOMs with power-pins built-in)
S-SATA 0~3 SATA 3.0 connectors supported by Intel SCU (S-SATA 0-3)
I-SGPIO1/2 Serial_link General Purpose I/O (GPIO) headers 1/2(for I-SATA0-3, I-SA -
TA4/5)
S-SGPIO1 Serial_link General Purpose I/O (GPIO) header (for S-SATA0-3)
SP1 Internal speaker/buzzer